Single-Leaf Custom Sizes
Minimum dimension of length or width is 6” (152.4 mm). Door sizes can be in increments of 1/16” (1.6 mm). Non-standard sized access panels may need to be manufactured as multi-leaf doors.
Custom size example: single leaf 16 1/8” x 40” (409.6 x 1016 mm) for 5/8” (15.9 mm) drywall with touch latches.
Product code: 20-58-16.12540
Large Multi-Leaf Custom Doors
Our panels can be manufactured as multi-leaf doors in Butterfly and Bomb Bay styles, depending on the opening size. There are no cross bars at the centre on both designs, just a continuous clear opening.
Custom size example: double-leaf 48” x 48” (1219.2 x 1219.2 mm) for 5/8” (15.9 mm) drywall with touch latches.
Product code: 20-58-4848-2
Butterfly Style Multi-Leaf Opening (Illustrated Below)
Bomb Bay Style Multi-Leaf Opening (Illustrated Below)
Size restrictions apply.
Concealed touch latch – standard (Adds –TL to product code)
(Optional) Slotted screwdriver cam latch (Adds –CAM to product code)
(Optional) Key operated cylinder lock, (2) keys per lock, keyed alike (Adds –K to product code)
(Optional) Tamper-resistant torx head cam latches (Adds –TX to product code)
Board Inlay specification
The access panel inlay should equal the wall & ceiling specifications to ensure acoustic integrity.
bauco®•plus II is supplied standard with moisture and mold resistant gypsum board inlay
(Optional) bauco®•plus II is supplied with tile backer board
(Optional) bauco®•plus II is supplied with increased STC rating options
(Optional) bauco®•plus II is supplied with other wallboard specification as required
Multi Layer Drywall Installation
The bauco®•plus II access panel can be installed in a wall or ceiling where there are multiple layers of drywall. In this application the installer will need to recess the panel to the finishing layer by removing an 1 1/4" (31.75 mm) past the cut opening from the extra layers of drywall allowing the access panel frame to mount to the finishing layer. Please take a look at our double layer submittal drawing for details.
bauco®•plus II panels for ceiling installation will be hinged on the longest side unless specified. When bauco®•plus II panels are used in a wall installation, the hinges must be located on the floor side. The last 2 digits of the product code will always be the hinge location, and always the horizontal measurement for a wall installation.
Hinge location examples:
18" x 24" (457.2 x 609.6 mm) panel for ceiling installation hinged on the 24” (609.6 mm) side: product code 20-58-1824
48” (1219.2 mm) Vertical x 24” (609.6 mm) Horizontal for wall installation: product code 20-58-4824